Welcome, Guest. Please login or register.

Author Topic: Inter-Tel Axxess Setting Time & Date  (Read 6571 times)

0 Members and 1 Guest are viewing this topic.

Offline MacGyver

  • Administrator
  • Location: Dallas, Texas
  • Posts: 4714
Inter-Tel Axxess Setting Time & Date
« on: November 07, 2010, 08:24:39 AM »
To set date and time on your Inter-Tel Axxess you have two choices.  You can do it from the programming console GUI, or by setting it at the phone as follows:

Note that you must be at a phone with Administrative Privileges to perform the change.

While on hook, enter the Set Date/Time feature code (9800). Your display shows DATE (current date).

If you do not need to change the date, press # or ACCEPT to skip to the TIME prompt and then follow the instructions below where it says TIME.  

If you DO need to set the date, use the keypad keys to enter the month, day, and year. For example, 010300 is January
3, 2000. When finished, the display shows TIME (current time). If you entered the date
incorrectly, the display shows INVALID DATE; you are prompted to enter a new date.

If you do not need to change the time, press # or ACCEPT twice to exit. The display
shows SYSTEM DATE AND TIME UPDATED.

TIME:  

Use the keypad keys to enter the time in hours and minutes. (For example, enter 0900
for 9:00.) If you entered the time incorrectly, the display shows INVALID TIME and
you are prompted to enter a new time.

If the system is set for 12-hour display format, the display shows SELECT AM OR PM
(AM=1 PM=2). Press for AM (or the AM menu key) or press for PM (or the PM
menu key). The display shows SYSTEM DATE AND TIME UPDATED. If you press
any key other than 1 or 2, the display shows INVALID TIME and you are prompted to
enter a new time.
-I'm only here because my flux capacitor is broken.