Welcome, Guest. Please login or register.

Author Topic: Cutting over a new system tomorrow with a PRI. HELP!  (Read 92 times)

0 Members and 1 Guest are viewing this topic.

Online EV607797

  • Moderator
  • Location: Northern Virginia (Metro DC Area)
  • Posts: 731
Cutting over a new system tomorrow with a PRI. HELP!
« on: July 05, 2018, 07:41:11 PM »
Hey, all.  I was brought in by my company to ONLY take care of hooking up the existing paging hardware to this on-prem Zultys system.  Now, they're telling me that I need to be in on the PRI cutover call because the company doesn't have anyone who understands telco terminology.  Granted, the system is installed and working and we have the PRI connected to the system, but I'm not sure what else I can do.  Is anyone able to assist me?
Ed Vaughn

(540) 623-7100 (V)  (540) 693-5800 (F)
EMVaughn3@Outlook.com

Online telemarv

  • Moderator
  • Location: Ottawa ON Canada
  • Posts: 1320
Re: Cutting over a new system tomorrow with a PRI. HELP!
« Reply #1 on: July 05, 2018, 07:55:18 PM »
Marty (matherton) knows Zultys.
Marv CCNA


If people had more manners... we'd need fewer laws.

Online silversam

  • Moderator
  • Location: NYC
  • Posts: 999
Re: Cutting over a new system tomorrow with a PRI. HELP!
« Reply #2 on: July 05, 2018, 09:00:59 PM »
Ed -

Do you have any T-1 test gear (Sunset, T-Bird, etc.)? If the Telco says the PRI is working, can you check to see if it is or isn't?

Without that you're relying on the System info that may or may not (I know nothing about Zultys) be useful.

Sam