Welcome, Guest. Please login or register.

Author Topic: DX80 programming software?  (Read 418 times)

0 Members and 1 Guest are viewing this topic.

Offline EV607797

  • Moderator
  • Location: Northern Virginia (Metro DC Area)
  • Posts: 736
DX80 programming software?
« on: January 02, 2018, 02:58:28 PM »
Does anybody have it?  We have a site with a dead DX-80 in PA that Don Baker is working on.  He needs to initialize it and re-load the database.  I looked on Vertical's FTP site and there are several items there in the DX-80 folder, but I'm not sure which one is correct.  If you have it, will you please forward it to Don?  Many  thanks!
Ed Vaughn

(540) 623-7100 (V)  (540) 693-5800 (F)
EMVaughn3@Outlook.com

Online CMDL_GUY

  • Administrator
  • Location: Mt. Sidney Virginia
  • Posts: 7326
    • www.lscg.net
Re: DX80 programming software?
« Reply #1 on: January 02, 2018, 05:47:24 PM »
I'm sure I have it and will check in the shop tomorrow.  I should have a couple of new CD's and books which are about to go in the trash.  Don can have all of it.  There are a couple of different versions and well as a different program for the DX80 voicemail.
"Government is not reason; it is not eloquent; it is force. Like fire, it is a dangerous servant and a fearful master." - George Washington

K4LRM

www.lscg.net

Online CMDL_GUY

  • Administrator
  • Location: Mt. Sidney Virginia
  • Posts: 7326
    • www.lscg.net
Re: DX80 programming software?
« Reply #2 on: January 03, 2018, 02:08:26 PM »
I have a couple of the original install disks which all the programms and documentation.   If you PM me the address I can send you an original CD.

This has the programming software for the DX80 as well as the voicemail.   This is ver. 1.6 for A33.  I should have the earlier version as well.
"Government is not reason; it is not eloquent; it is force. Like fire, it is a dangerous servant and a fearful master." - George Washington

K4LRM

www.lscg.net

Offline ttech

  • Moderator
  • Location: Paoli, PA
  • Posts: 240
Re: DX80 programming software?
« Reply #3 on: January 03, 2018, 04:54:57 PM »
I downloaded the F44 version off of the Vertical FTP site.

Chips on the main board say U16 A33 and U14 A33


Will the software work?

Offline RATHER BE FISHING

  • Moderator
  • Location: South Texas
  • Posts: 901
Re: DX80 programming software?
« Reply #4 on: January 03, 2018, 04:59:29 PM »
That will work.
Vertical Comdial Dx80 and  DX120 Voice Mail Repair/Compact Flash Cards
Comdial Debut Compact Flash Cards

Offline ttech

  • Moderator
  • Location: Paoli, PA
  • Posts: 240
Re: DX80 programming software?
« Reply #5 on: January 03, 2018, 05:01:46 PM »
Thanks.

The system is acting Wonky.  I was told to back it up, default it and restore it.   There is a 3.5' Floppy there that says backup, but i have to dig up a floppy drive to use it. 

Offline RATHER BE FISHING

  • Moderator
  • Location: South Texas
  • Posts: 901
Re: DX80 programming software?
« Reply #6 on: January 03, 2018, 06:42:56 PM »
Usually when they start acting up like this it is either a surge induced database corruption or more likely the mother board is fixing to give up the ghost. Hopefully a database reprogram will fix the issue but the DX80 line is getting to be a fairly dated Tecom product.
Vertical Comdial Dx80 and  DX120 Voice Mail Repair/Compact Flash Cards
Comdial Debut Compact Flash Cards

Online CMDL_GUY

  • Administrator
  • Location: Mt. Sidney Virginia
  • Posts: 7326
    • www.lscg.net
Re: DX80 programming software?
« Reply #7 on: January 03, 2018, 08:32:53 PM »
What Dave said!   :054:
"Government is not reason; it is not eloquent; it is force. Like fire, it is a dangerous servant and a fearful master." - George Washington

K4LRM

www.lscg.net