Welcome, Guest. Please login or register.

Author Topic: Mitel SX200 ICP Ground Start Trunks  (Read 3821 times)

0 Members and 1 Guest are viewing this topic.

Offline CMDL_GUY

  • Administrator
  • Location: Mt. Sidney Virginia
  • Posts: 8526
    • www.lscg.net
Mitel SX200 ICP Ground Start Trunks
« on: May 18, 2010, 07:47:14 PM »
Does the Mitel 200 ICP support ground start trunks?
"Government is not reason; it is not eloquent; it is force. Like fire, it is a dangerous servant and a fearful master." - George Washington

“Remember democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet, that did not commit suicide.”   -John Adams

K4LRM

www.lscg.net

Faster horses, younger women, older whiskey, more money.

Offline rich30529

  • Moderator
  • Location: Metro Atlanta Georgia
  • Posts: 308
    • pinn360.com
Re: Mitel SX200 ICP Ground Start Trunks
« Reply #1 on: May 19, 2010, 10:32:13 PM »
You probably already have the answer by now, but, I was reading and it says you can have ground start trunks in a peripheral cabinet, if you have an MX controller. It doesn't show it as an option on the CX/CXi controller. Hope this helps. :054:
Senior Mitel system engineer
Pinnacle Communications, Inc.

Offline TECHarry

  • Technician
  • Location: Winchester, VA
  • Posts: 77
    • Telecom Equipment & Consulting
Re: Mitel SX200 ICP Ground Start Trunks
« Reply #2 on: May 20, 2010, 05:15:12 AM »
The  MX  controller  has  6  embedded trunks  with  an  option  to  add  6  more,  but  they  are  Loop  Start  only.   Like  Rich  said,  to  get  Ground  Start  trunks  you  need  a  LS/GS  card  in  a  peripheral  cabinet.   Then  you  have  to  find  somebody  at  the  phone  company  who  remembers  what  a  GS  trunk  is.

Harry
Harry Braithwaite
Telecom Equipment & Consulting
Specializing  in  Mitel  systems  for  the  Lodging  industry
www.TECHarry.com