Welcome, Guest. Please login or register.

Author Topic: sts e flash VM set up  (Read 15028 times)

0 Members and 1 Guest are viewing this topic.

Online Skip555

  • Moderator
  • Location: Sarasota Fl
  • Posts: 987
sts e flash VM set up
« on: March 09, 2015, 09:56:16 PM »
Customer wants  day mode to overflow to ext 100 VM after 4 rings .   night mode (set manually ) to go to 100 mailbox after  2 rings

he also wants to be able to answer incoming ringing calls by lifting the handset so I will have to have all lines ring at all extensions

need the ability to transfer calls to other users vm

it looks like flash 50 page c  internal and external forwarding is what I need 

only 100 forwards to 440 on external calls  all others forward to 440 on internal calls

will that do it ?
---------------------------------------------
Skip

...Serving SW and West Central Fl since '84

Offline EV607797

  • Moderator
  • Location: Northern Virginia (Metro DC Area)
  • Posts: 629
Re: sts e flash VM set up
« Reply #1 on: March 10, 2015, 08:58:49 AM »
The easiest work around for this is to make extension 100 NOT the attendant station.  That way, unanswered calls to it will go to the mailbox just like any other station if you have it set that way in flash 50/51, page C.

You can get around having all of the phones ring for preferred line answer (PLA) by programming them to ring but then disabling the ring tone by dialing 695+36+ speed to save.  Since most small offices use handsfree intercom signaling, this absence of ringing probably won't be an issue.

The day and night overflows you mentioned are all outlined in flash 40.  You set the preset forward destination (440) for the CO lines there on page B, along with the desired mailbox number (100).  Page C allows you to adjust the timers for preset forward for both the day and night modes.

Transferring a call to another person's mailbox is very easy.  With the caller on the line, just press the voice mail button (this puts them on hold), dial the mailbox number you want (or press the DSS button for that station) and hang up.  The caller will immediately be transferred to that person's mailbox.
Ed Vaughn
Operations Manager
Zaitek Converged Communications Solutions
(540) 735-2300 X108

Online Skip555

  • Moderator
  • Location: Sarasota Fl
  • Posts: 987
Re: sts e flash VM set up
« Reply #2 on: March 11, 2015, 07:48:36 AM »
just what I needed , that worked great , thanks Ed
---------------------------------------------
Skip

...Serving SW and West Central Fl since '84